Spare parts for mud pumps
- UNB-600, (U8-6mА-2),UNB-600L, UNBT-600
- NBT-600, NBT-600-II, NBT-475, UNBT-950
- NBT-600-1(two grooves)
- BRN-1
- NBT 235/40 (F140/F188)
- NBT-300
- UNBT-950L, UNBT-950L1,(UNBT-1180L),UNBT-1180LII
- UNBT-1180L
- UNBT-600
- 8Т650-01, UNR-475h32
- 9Т, NC-320
- (8Т310) PZ-5,PAH-8,TGH
- PZG-7,PZ-7,PZ-9 Gardner-Denver
- F-500, RGF-800 (F-800), F-1000, F-1300,F-1600
- 15W-600 Ellis Williams and other mud pumps
- 3PN-500, 3NB-1000
Select your liners:
1. Bimetal liner
The bimetal liner (composed of two housing parts and an insert). The outer part is made ??of round steel billets Article 20, 40,45,40 X, has a high tensile strength, toughness. By means of heat treatment the hardness of the inner surface of the liner is 59-64HRC and it has high wear material insert, cast iron with high chromium content of Cr 26-28%. At nominal operating conditions bimetal liner is capable of withstanding high pressure drilling fluid and provide a period of more than 800 hours of use. Guaranteed period is 400 hours.
2. Ceramic liner
Ceramic liner for drilling pumps are designed to operate in harsh geological conditions when working with large oil reservoirs depth, and are also used in offshore oil and gas deposits. Lifetime of ceramic liner is 5-10 times higher in comparison with the bimetallic liner and is more than 4000 hours.
Zirconia ceramic sleeve, developed with the help of technology and increase the phase transformation plasticity, characterized by high corrosive resistance, endurance, high strength and hardness, and the ability to perform work at a high pressure, high temperature. Using this liner reduce costs and drilling time. Compared with steel liners these ones have such properties as higher ductility, increased service life, reduced wear of pistons, etc.
3. Chrome liner
Housing of chrome liner is made of round steel billets Article 20, 45.40 H. Using a special coating technology - the inner hole is coated with hard chrome thickness of 20 microns, through which, the surface hardness reaches 58-62HRC. Term of liners use is more than 400 hours.
4. Bush, treated by high-frequency current hardening, cementation.
Liner is made of round steel billets, st.20X, Article 70. With the technology of high-frequency current hardening, carburizing or quenched in bulk, purity inner hole becomes higher and reaches values of hardness 58-62HRC. Term of use is more than 200 hours.
All liners processed at the inner surface of 0,32 Rz (mirror surface)
The liners have been successfully tested on drilling fields of Udmurtia, Western Siberia at such companies as "Gazprom-Drilling" branch of UKhTA Bovanenkovskoye field, drilling company "Eurasia" Kogalym, LLC "RU-Energy cattle MG" Drilling Company "PNG"
All products are certified: Certificate of Compliance number 0 384219 from 25.03.2011 valid until 24.03.2014 ..
At your request we produce other spare parts for mud pumps (polyurethane gasket valves, saddles, rods, pistons, guides, Rubber Technical Products)
Gallery
Other spare parts for mud pump (UNB-600, battery-3M2, NB-32, NB-50, ASC-320 (CA-320)) (pistons, mouths, dr.zip) price list on request
- Spare parts for pump TGH, PZ-5 (8T310) (piston rod, valve seat)
- Spare parts for pump PZ-7 parts catalog PZ-7
-
Name PZ-7
Room
Insert 6 " PY13960 Insert 5 " 200PZG456 Insert 4 1/2 " 201PZG456 Piston unit 6" 241TBB045A Piston unit 5" 241TBB045A Piston unit 4 1/2" 239TBB045A Node liner 6" TBB76024 Node liner 5" TBB76024 Node liner 4 1/2" TBB76022 Gasket (liner to cylinder)
25АТ37 Seal
25АН1 Piston rod
201PZG060 Clutch Hose Connector (clip)
200PZJ092 Valve seat 202PZL039 Node hydraulic valve
202PZL482A Polyurethane liner
201PZL106 Valve Spring
78H44 Valve Cover Gasket
2011862 Gib valve (suction)
2011701 Valve guide (suction)
2011700 Screw
655EE06S Sleeve valve guide (suction)
2007674 Laying the discharge pipe
25АL35 Extension rod (polushtok)
200PZG839 Seal (polushtoka)
2011872 The guide (parallel) of the slider 200PZG309 Slider (crosshead)
200PZG005 Finger slide
200PZG189 Roller slide
12ВА19 Intermediate shaft bearings
12W75 Connecting rod bearings
12ВА18 Reflector rod
2FXK840 Grease pump pistons
СА122 Pump Maslen
46С21 Node puller Seat
100Е15 Node of the filter element 5Е30 Gidrokorobki stud to the body 1.1 / 4 "
79L188 Locking the box pin to the housing 1.1 / 4 "
50В36 Hairpin gidrokorobki to the housing 7/8 "
79L73 Locking the box to the stud body 7/8 "
50AQ30 Hairpin valve box 79AL6 Valve nut studs
50ВЗ4 Hairpin nagnetatelnogot pipe
209PZL110 Nut studs nagnetatelnogot pipe
50AW11 Valve cover
2011860 The twin clutch
4064-16DAS Bearing
22222 EAS KM Sealing
LER109 Node of the hydraulic cylinder
205PZL029D - Spare parts for pump 8T-650-01 (UNR-475h32) (piston rod, valve seat)
- Spare parts for the pump F-500, F-800, F-1300 (piston, rod, valve seat)
-
To place an order for the manufacture
tel. (3412) 59-58-99, 59-71-81
e-mail: zubkov@pmmarket.ru
skype: azubkoff
Back to the section