English

Screen panels and cassettes shakers


LLC "PROMMARKET" started serial production of sieving panels and cassettes with any dimension of shakers Derrick, Kem-Tron, Swaco, Brandt. Cassettes shakers are designed for complementing vibration systems used in fine and coarse cleaning solutions in the oil and gas industry.

"PROMMARKET" LLC offers two-three-layer stretch, frame, pyramidal sieve panel quality.

Feature stretch panels is that their edges from both sides embedded in the locks that allow the secure and simultaneously pull the net canvas on a vibrating sieve.

Frame panels provide rigid mounting mesh fabric to the frame of the metal profile. To prevent the process of stretching and sagging mesh fabric on the frame can be pre-attached perforated metal sheet or pre-tensioned net canvas is glued directly to the frame structure. This cassete design has significant advantages: increased throughput, improved separation quality, longer service life. Mounting frame cassettes carried wedges that provides quick replacement of faulty tapes and eliminates the possibility of damage to the newly installed.

Pyramidal sieve panel is a three-layer panel with wavy (pyramidal) profile for larger working surface area, thereby increasing the efficiency of drilling mud cleaning.


For strength cassette net canvas reinforced by plastic grille. This decreases the bandwidth cassette, but significantly increases its life. Reinforced plastic grille net canvas is a three-layer structure: fine screen, plastic grille, coarse mesh. Accordingly, cassettes were called three layers.

The main drawback of most sieving panels is lower abrasive wear resistance of the upper layer of the screen. Our sieve panels made ​​of wear-resistant materials stainless steel mesh material 12X18H10T.


Features sieve panels produced by PROMMARKET LLC:

The name and model of the shaker

Mesh size, mesh

Size of the panel, mm

Panel weight kg

Derrick 48/2000, Derrick 503, 504 (PWP PMD)

16-325

7001050

5.5

SWACO

MON900SE

16-325

585×1165

12

BRANDT

BL-50

16-325

635×1253

13,5

BRANDT

VSM-300

16-325

913×650

12,5

KEM-TRON

KTL48 Series

16-325

720×1220mm

17

SF300

16-325

712×1181mm

17

Important specifications sieve panels are:

1)The capacity of the grid fabric. Depends on the size of the working cell mesh wire diameter, number of grids in the fabric, type and method of reinforcement. The capacity - the inverse of flow resistance and the liquid to be filtered is measured in CD / mm (Kilo Darcy / mm). For one layer fabric bandwidth depends on the size of the cell and the wire diameter, and for multigrid fabric bandwidth is calculated as the sum of the bandwidth of each grid separately.

2) The transmission coefficient. D Used To comparison cassettes of different designs with different grid fabrics. It is calculated as the product of the working area of the cassette and its bandwidth.

3) The quality of the separation. This is the most important characteristic of the grid fabric that determines the degree of purification mud. The given parameters separation net canvas must have a certain size of a cell working grid. For a complete shakers foreign production grid cell size of the working tapes often indicate a mesh (Number of cells per inch). Dimension in the mesh can be calculated by the formula:

N mesh =

wheres-meshsize (in mm);d- diameter of the wire, which is made ​​of mesh (in mm).

Translation-sized hole in the mesh.

The size of the passing particles, max (mm)

Dining "mesh"

BSS

Tyler (approx.)

US (approx.)

1,200

14

14

16

1,000

16

16

18

0,853

18

20

20

0,699

22

24

25

0,599

25

28

30

0,500

30

32

35

0,422

36

35

40

0,354

44

42

45

0,297

52

48

50

0,251

60

60

60

0,211

72

65

70

0,178

85

80

80

0,152

100

100

100

0,125

120

115

120

0,104

150

150

150

0,089

170

170

170

0,076

200

200

200

0,066

240

250

230

0,044

350

325

325



Back to the section

Products

Metal products


Oil equipment


Drive belts

PROMMARKET LLC
Forgings, shaped, centrifugal casting, spare parts for mud pumps (liners, pistons), and other metal products according to your drawings.