Shaped molding
|
Part name |
Material |
Dimensions |
|---|---|---|
 Shaped molding from heat resisting, heat-resistant wearproof and carbonaceous steel and alloys (retorts pallets, bottom plates, crosspieces, lattices, grid-irons, muffles, crucibles, etc. for Ц-150,-105,-90,-75,-60, СШЦМ, СНЦА furnaces, Birlek, Ulvak, Holkroft, etc., plates for crushing of breeds, shovels the rotoblast equipment, beater rods, armour)
 Iron, steel castings by sand and clay forms
/images/sterzhni.jpg "отливка стержень") Molding on burned-out models from expanded polystyrene.
|
Steel, alloy type 20Х25Н19С2Л 12Х18Н9ТЛ 10Х18Н9Л ИЧХ ИЧХ28Н2 ЖЧХН ЧХ 110Г13ФТЛ 110Г13 Nirezist 20Х23Н18Л
СЧ, ВЧ
ЦАМ4, АК7,АЛ9
ГОСТ 977-88
110Г13
110Г13ФТЛ
|
__ \\ __
from 0,5 kg to 2 т from 5 kg to 4 т. |
/images/iron.jpg "чугунные болванки")
В зависимости от рабочей температуры рекомендуем следующие марки сталей:
| Марка стали | Температура, С |
| 10Х18Н9Л | 700 |
| 12Х18Н9Л | 700 |
| 20Х20Н14С2Л | 900 |
| 20Х25Н19С2Л | 1100 |
| 35Х18Н24Н12СЛ | 1200 |
Back to the section
